How to deal with broken pvc water pipes from toothpaste shells very quickly without cutting pipes.

Unfortunately, it is not possible to repair a broken PVC water pipe without cutting it. PVC pipes are not designed to be repaired, as the plastic is too brittle to be reshaped once it has been cut or damaged. To fix a broken PVC water pipe, the damaged section must be removed and replaced with a new piece of PVC pipe. Here is the process you can follow: Turn off the water supply: Before you start any repair work, turn off the main water supply to the affected pipe to avoid any water damage. Locate the break: Try to locate the exact location of the break by tracing the pipe and listening for any water leaks. If necessary, you can use a pipe locator device to find the break. Cut the damaged section: Cut out the damaged section of the pipe, using a PVC cutting tool, a saw, or a hacksaw. Prepare the new section: Cut a piece of PVC pipe that is the same size as the removed section and make sure both ends are clean and square. Install fittings: Install two fittings, such as PVC couplings, onto the ends of the new pipe section. Join the pipes: Slide the fittings onto the cut ends of the remaining pipes and connect the new section to the fittings. Use PVC glue to secure the connections. Test the repair: Turn the water supply back on and check for any leaks. If there are no leaks, your repair is complete. It's important to note that PVC pipes are designed to be replaced, not repaired, so it's recommended to replace the damaged section of the pipe in its entirety.